
30 007-5759-001
5: System Serverboard Information
Serverboard Details
The 2U C2112-4G3 system chassis has four node boards (serverboards). Each C2112-4G3
serverboard is configured with one or two processors. When properly configured, the following
rules apply:
• Both processor sockets must have identical revisions, core voltage, and bus/core speed.
• The stepping between the processors on the board must be identical.
• See Figure 5-3 on page 32 for CPU locations on the serverboard - note that the drawing is
not to scale.
CPUs
• AMD Opteron 6100 series (Socket G34 type) processors
Note: A minimum of one processor must be installed in each serverboard for full function to
be supported.
Memory
• Up to eight DDR3 DIMMs are supported on single-CPU serverboards
• Up to sixteen DDR3 DIMM slots are supported on each dual-CPU serverboard
Note: Refer to the memory installation information in this guide before installing new
memory. Check with your authorized sales/service representative for approved DIMM types.
Chipsets
• One AMD SR5670/SP5100 Southbridge chipset
Expansion Slots
• One PCI-Express x16 Gen. 2 low-profile slot per serverboard (four total)
PCIe boards must be less than 5.9 inches (15 cm) in length
• 16 Mb AMIBIOS
®
SPI Flash ROM
• APM 1.2, DMI 2.3, PCI 2.2, ACPI 1.0 (ACPI 2.0 is BIOS supported), SMBIOS 2.3, Real
Time Clock Wakeup, Plug and Play (PnP), BIOS resume hot keys
Komentarze do niniejszej Instrukcji